ST14 – TATRA 813 KOLOS

Credits
Original mesh model made By Drracer
Drracer – David Øehoø: original Tatra model mesh maker
Péter Polánszki – engine sound
Animation, Setup and new remaked textures and addons by arraial
Final setup, media, tuning and presentacion by Zidon
Anders Orum – trailers pack – http://www.oovee.co….trailer-pack-2/
Driver add by Zidon by Gabe
Test pilot Hein special thanks to hin for all they have make so far for Spintires game.

Source: Oovee

Description

 

Tatra 813 by Arraial and Zidon

The first prototype already built in 1960 utilized existing Tatra T138 assemblies in 4×4 full-time all-wheel drive, which was also another first for Tatra. After the initial trials however the designers decided to develop and expand the concepts onto 8×8 all-wheel-drive all-terrain vehicle. The basis of the design thus became the modular chassis of T813. Successor is the Tatra T815 model.

The naturally aspirated V12 engine T-930 was created by adding extra four cylinders to the existing T-928 75-degree V8 engine, used in Tatra T138. The crankshaft consisted of six individual journals bolted together with front and rear pins all running on the main roller bearings and located on axial friction thrust washers. The military version was once again multi-fuel capable, running on mixtures of diesel fuel, petrol and aviation kerosene fuel.

The chassis is a full-length backbone tube with independent swing half axles in 4×4, 6×6 and 8×8. 4×4 models had front axle suspension via adjustable torsion bars, 6×6 and 8×8 models front and rear axles used longitudinal semi-elliptic leaf springs. For 4×4 configuration the rear axle was suspended via air suspension. Full-time all-wheel-drive front twin steer (6×6, 8×8) drive via homo-kinetic drive shafts, drive with the differential locks, inter-axle differentials with locks and planetary hub reductions on all models. Unlike many six-wheeled vehicles, which have a single front axle and tandem rear axles, 6×6 versions used twin steering front axles- as with the 8×8- and a single rear axle.

Instalation by Ziddon

Hi all – here is famous Czech offroad truck TATRA 813 :)
Spintires full game mod by Arraial and Zidon ;)

RENAME Tatra_813 ZIDON.xml or Tatra_813 ARRAIAL.xml (media/classes/trucks) to your desired truck that you want to replace in
game ( uaz, ural, kraz, zil, maz, maz2 …)
Then copy files to your game media folder..

ENJOY! ( and try other textures with red/white strips on bumpers )

zidon :)

The only diference in the files is the arraial xml have some flex in the chassis.

Installation

All the model have animated suspencion and all the model have animation parts.
Install it manualy – Decompress the file in your Desktop , Drag the /media folder inside the main root folder of the game /ST / Make a backup first of media.rar .

This model have the proper description here, requirements and instalation methode and was upload in OoveE DS , im not responsable for bad funcionality for lack of info data in 3 Party Sites. Any issue can only solved in the OoveE DS page or Forums.


screenshot.3628 screenshot.3629 screenshot.3630 screenshot.3631 screenshot.3632 screenshot.3633 screenshot.3634 screenshot.3635 screenshot.3636 screenshot.3637 screenshot.3638 screenshot.3639 screenshot.3640

Tagged , , , , , . Bookmark the permalink.

34 Responses to ST14 – TATRA 813 KOLOS

  1. viktor2505 says:

    Best model for ST14, good job bro,….make t815

  2. Tyler says:

    This is probably the best mod I have ever seen, even if you compare it to the tech demo mods, I will be using this mod for awhile, makes the game much more fun with all the addons, keep up the good work!

  3. sutros says:

    tenhle mod mi nefunguje nevim proc?

     

  4. Stranda says:

    Čau lidičky napište mi nikdo návod jak si dát mody do hry prosím vás o vše moc moc moc díky.Standa

  5. Kill4Free says:

    Hi there,could i suggest to the creator an addon?

    I don't know if is possible,but can you make an addon,a bridge layer?

    You made a bucket and a lifter,so i suppose you can made a mobile bridge based on the crane

    Also,you can insert the option of detatching the bridge like a trailer

    If you can make it,it will be freaking awesome

    Cheers 😀

  6. Roman71 says:

    Hi, first of all I must thank you for this great mod 🙂 And then I had one question, in which program do you create T813 model? Or you downloaded it somewhere? I would like to find a model T813 KOLOS for my personal use 🙂

  7. dean says:

    had some real fun with this truck 🙂

    • Spintires.nl says:

      Good. Nice to know people appreciate the truck. Please do also tell that on the Oovee forum at the download page of the truck. Im sure the authors would not mind to hear 😉

  8. Carlos Rubén Pascual says:

    Hi … !!
    at me I can be wrong .. ??
    I did not leave some trailer, and I do not get the shovel bulldozer truck …
    You could stop by here or by mail, how to install, either in detail .. !! ??
    Is very good from what I saw in the video, but I can not make it work, like in your video …
    Thank you very much .. !!

  9. mitkok12 says:

    Here is the fix for it. It works fine and without the black shadow, buggy windows and etc:
    http://www.mediafire.com/download/pcnuktpy4gg0sqg/Tatra_813_by_Arraial_and_Zidon_%5BFIX%5D.zip

  10. Kaku says:

    February 09, 2015 Converted to the latest xml and filename standard. Test ok.

  11. MADPOWER says:

    All i get is black windows and black square underneath…real shame

  12. Kaku says:

    I don’t know which version you have.
    I have tested my converted version again and all looks fine.

  13. MADPOWER says:

    I have Legacy. The link you give me do work yes.
    I first downloaded from original link in this page, and that is the one i was refering to.
    Thanks both of you guys:) all good now, going for a ride;)

  14. MADPOWER says:

    I`m getting bug everytime i try load small logs with small logs cariage.
    Are you folks having this kind of issue too?…the thing is that i messed up my xml so much,that by the time i discovered could not load logs was too late.Now i have a bunch of stuff to go thrue:|…so i`m just checking…i changed tatra for the maz2..could it be it?
    thanks in advance
    M.

  15. MADPOWER says:

    Thanks Hein…i will for sure!;)
    But you know…after i deleted all the things i`ve changed i realise that was still doing it.And to think that i deleted all my work on that tatra:(.Fix the sublights,diferent tracion system,new lights…etc.but already put them back cause what i found is that, if you`re not wearing the rear and front “listed” bumper it does not crash anymore.at least with small logs.
    See you

  16. MADPOWER says:

    Hein, if you want i can pass it on the xml file.i think for personall use is fine.what i did was:
    -sized all the lamps for better maching,
    -enablaed the front ones that were missing,some adjustments,
    – disabled the rescue one[sorry:)],
    -and made tracion with “rowwheel”,so the wheels don`t drag even with engaged tracion.
    -also give direcions on marker ligths so you can not see them thrue cabin anymore.
    -enabled 2 that were off.
    -Frontal exhaust and 2drivers you need to delete from xml
    i don`t intent to release,but can give to you for personall use i think…what you think:)do you think Zidon will have a problem with that?i don`t want to disrespect the guy,is cool gentleman!;)

  17. MADPOWER says:

    Only the drivers must delete,the exhaust is fine…bad choice of words:)
    Also now back axles steer a bit to help manouvering;)

  18. MADPOWER says:

    Hein,sorry for so many comments,but i wanted to say that my bug is not about textures.the issue is the truck start shaking like hell…if think this fix sove that too?because i fought this one was for black squares and windows,isn`t it?
    thanks

    • Spintires.nl says:

      The truck is fixed for black squares and windows yes. The shaking might have something to do with the game engine not able to handle more then 4 addons.

  19. Adam says:

    God listen to that V12. Sound is perfect.

Leave a Reply

Your email address will not be published. Required fields are marked *

nineteen − eighteen =